How do you make flat panel curtains?

What are flat panel curtains?

But what is a flat panel drapery anyway? It’s simply a drapery that hangs from drapery rings or a traverse rod and has a flat header. It isn’t hung from a rod pocket and it doesn’t have any pleats.

How do you make unlined curtains?

Making Unlined Curtains

  1. Cut the fabric to the required size, allowing 10cm (4″) for side hems and adding 20cm (8″) to the length for top and bottom hem allowances. …
  2. Turn in a double 2.5cm (1″) hem at each side and pin.
  3. Turn up a double 7.5cm (3″) hem at the lower edge and pin.
  4. Mitre both bottom corners.

What is concealed tab top curtains?

Concealed Tab Curtains

The tabs create a hidden slot to install the curtain rod behind the fabric for an elegant look to your room. Concealed tab curtains are best suited for traditionalist spaces that are looking to take on a softer feel.

How do you make loop top curtains?

Instructions

  1. Cut the Panel Fabric. The length and width of your curtain panels will depend on the size and placement of the windows, plus the hem allowances. …
  2. Determine Tab Length. …
  3. Cut ‘Em Out. …
  4. Finish the Panel Edges. …
  5. Attach the Tabs. …
  6. Attach the Facing. …
  7. Press the Facing. …
  8. Sew the Facing.
INTERESTING:  Should I have had stitches after birth?

How do you make tab top curtains with buttons?

How to Make Button Tab Panel Curtains

  1. Measure the width of the window. …
  2. Measure and cut the fabric with for the curtain panels. …
  3. Cut the fabric into 6-inch by 9-inch rectangles for button tabs. …
  4. Fold one tab in half lengthwise, wrong sides of the fabric together. …
  5. Position the button in the center of the tab width.

How do you sew two panels together?

Place the curtain panels on top of one another, right sides together. Then pin the vertical edges you unpicked together. If your fabric is quite thick you may opt to clip the two panels together instead. If you’re working with patterned panels check that the pattern matches before and after pinning.

Do you need 2 curtain panels?

While it may seem logical that curtains should come in sets of two, curtains do not always come in pairs. They most often come in panels. Panels are a single piece of fabric or one curtain. If you want a typical curtain pair, you will need to buy two panels.

What is curtain rod pocket?

The most classic and common of all methods of hanging curtains, a rod pocket is a sewn-in pocket, or casing, at the top of a curtain panel that easily slips over a rod and conceals it.