How do you adjust the tension on a Husqvarna Viking sewing machine?

How do I reset the tension on my sewing machine?

Changing Bobbin Tension

Turning the screw a tiny bit counterclockwise will loosen the bobbin tension; turning it clockwise will tighten the tension. Some quilters keep two bobbin cases on hand, leaving one as-is from the factory and using the other when they need to make adjustments.

Why does my Viking sewing machine keep jamming?

If your bobbin is threaded wrongly, it could cause jamming issues to your sewing machine. Your bobbin thread won’t move properly if there are knots or if the bobbin isn’t properly wound. Check to see if the threading on your bobbin is all tangled, and fix it if you can.

How do you adjust bobbin tension?

To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.

Why is my Husqvarna sewing machine problems?

Common Husqvarna Viking Sewing Machine Problems

Skipped or loose stitches: Caused by bent, broken, or dull needle or incorrect tension. … The needle snaps: Often caused by sewing over a pin, button, or zipper. Using the incorrect presser foot could also cause a needle to break.

What thread tension should I use?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

INTERESTING:  Where on a sewing machine does the bobbin case go?