What are the possible troubles encountered in winding the bobbin?
If the thread gets caught or tangled while you are winding the bobbin, the bobbin could be wound unevenly. When winding the bobbin, feed the thread through the winding tension disks so the thread has proper tension and the threads lie next to each other.
Why does my sewing machine keep jamming underneath?
The reason for the problem could be lint, dust and other debris getting stuck in their mechanism. The solution: Stop work, lift the presser foot and thoroughly clean the fee dogs from any debris. Also, make sure that they are lifted up in a raised position allowing for a proper grip of the fabric.
First, your needle may be dull or damaged and needs to be replaced. You should also check that you are using the correct needle for the type of fabric you are sewing. … If the needle is not inserted correctly, it will not be able to pull up the bobbin thread and will cause skipped stitches.
Your Thread Tails Are Too Short
If the thread tails that come out of your bobbin are shorter than two inches, they may get sucked into your sewing machine when you begin to sew. This can cause thread bunching underneath your fabric.
Why is my bobbin threader not spinning?
Move the bobbin thread spool pin up as far as possible. … NOTE: If the correct size bobbin is not used at this time; when the bobbin winder is engaged; the bobbin winder will make a usual noise and not wind the bobbin correctly. 6. Place the spool of thread for the bobbin onto the bobbin thread spool pin.
Why is my thread wrapping around the bobbin?
Some of the main reasons your thread could be wrapping around the bobbin include lack of proper maintenance, causing a buildup of lint and debris, improperly threading the machine, using the wrong needle, or using a different thread weight that is not recommended.
What are the common sewing machine troubles causes and remedies?
Causes and Remedies
- Needle thread breakage.
- Bobbin or looper thread breakage.
- Thread fusing when the machine stops.
- Skipped stitches.
- Imbalanced / variable stitching.
- Staggered stitching.
- Variable stitch density.
- Seam pucker.
How does sewing machine pick up bobbin thread?
With your right hand, turn the balance wheel toward you (counterclockwise) until the needle moves down and back up again to its highest position. The upper thread should have caught the lower thread in a loop. Pull the upper thread toward you and the lower thread will come up from the bobbin in a large loop.
Why isn’t my sewing machine making a stitch?
If the top thread is not reaching the bobbin, the threads will not lock properly, resulting in a skipped stitch. Re-thread your machine, both top and bobbin threads, and test. If your machine is still skipping stitches, there may be an issue with the timing, which will require expert repairs.
Why does my sewing machine keep bird nesting?
Bird nests occur when thread bunches up underneath the needle plate, causing broken threads, skipped stitches, or uneven tension. This is typically caused by the top thread not being threaded correctly or a sewing machine tension issue.
How do I know if my bobbin tension is correct?
The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.