How do you fix a loose bobbin thread?
To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. … In this case, it might be necessary to loosen both the bobbin tension AND the top tension.
You should see a small screw on the flat/closed side of the bobbin case. Turning the screw a tiny bit counterclockwise will loosen the bobbin tension; turning it clockwise will tighten the tension.
Why is my thread getting tangled in the bobbin?
If your sewing machine thread is not properly threaded, the bobbin thread won’t be pulled up into the fabric the way it needs to be. Occasionally the upper thread can catch on a moving part or get stuck, which impedes the easy flow of thread through the needle, creating a tangle.
Why is my thread wrapping around the bobbin?
Some of the main reasons your thread could be wrapping around the bobbin include lack of proper maintenance, causing a buildup of lint and debris, improperly threading the machine, using the wrong needle, or using a different thread weight that is not recommended.
Why is my sewing machine bunching underneath?
Your Thread Tension Is Too Tight
Sewing machine manufacturers suggest that you don’t mess with your bobbin thread tension too much, but you should adjust your upper thread tension if you keep getting bunched up thread underneath your fabric. If your tension is too tight, it can pull your thread and break it.
What tension should my sewing machine be on?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
Why does my sewing machine jam underneath?
However certain you are that the problem with the machine is most likely due to a huge tangled mess of thread in the bobbin underneath the fabric, the most common reason for the jamming is usually the lack of sufficient tension in the upper thread.