Contents
show
How do I stop my sewing machine from eating my fabric?
Check out these tips to starve that hungry sewing machine
- Tip #1: Test the stitch length. …
- Tip #2: Stabilize your fabric. …
- Tip #3: Use a stitch starter. …
- Tip #4: Use a scrap piece of fabric to get started. …
- Tip #5: Use the right needle. …
- Tip #6: Buy a straight stitch needle plate. …
- Tip #7: Rethread your machine.
Why does my sewing machine keep jamming underneath?
The reason for the problem could be lint, dust and other debris getting stuck in their mechanism. The solution: Stop work, lift the presser foot and thoroughly clean the fee dogs from any debris. Also, make sure that they are lifted up in a raised position allowing for a proper grip of the fabric.
Why is my fabric getting stuck in the machine?
Trying to use too short a stitch length can cause some fabrics to bunch and become caught beneath the presser foot and from there become jammed into the machine. Use a fabric scrap to adjust your stitch length, starting your test stitching from the middle of the fabric.
What is a walking foot used for on a sewing machine?
A walking foot is a mechanism for feeding the workpiece through a sewing machine as it is being stitched.
What are the common sewing machine troubles causes and remedies?
Causes and Remedies
- Needle thread breakage.
- Bobbin or looper thread breakage.
- Thread fusing when the machine stops.
- Skipped stitches.
- Imbalanced / variable stitching.
- Staggered stitching.
- Variable stitch density.
- Seam pucker.